• Home
  • Products
    • Pavement Marking
      • Bituminous Applicators & Accessories
        • BIGSHOT 500 Series
        • BIGSHOT 500CFG, Continuous Flow Gear Pump
        • BIGSHOT M125 Manual
        • BIGSHOT 600D
      • Epoxy Adhesive Applicators
        • 160CF Continuous Flow
        • 160SP Shot Type
      • Glass Bead Systems
        • Pressurized Bead Systems
        • Gravity Flow Bead Systems
      • Paint Stripers & Sprayers
        • Easy Riser™ Striping Gun Elevator
        • PROSTRIPER II : Ride-On Line Striper for Traffic Paint
        • GRACO LineDriver, LineDriver HD and LineDriver ES
        • GRACO LineLazer 250SPS
        • GRACO LineLazer 250SPS Automatic
        • GRACO LineLazer 250SPS Reflective
        • GRACO LineLazer V 250DC Reflective
        • GRACO LineLazer V 250DC Automatic
        • GRACO LineLazer V 130HS
        • GRACO LineLazer V 3400
        • GRACO LineLazer V 3900
        • GRACO LineLazer V 5900
        • GRACO LineLazer V ES 1000 & 2000
        • GRACO LineLazer V 200HS
        • GRACO RoadPak & RoadPak HD, 1 or 2 Pump System
      • Plural Component Sprayers & Accessories
        • KOLDSPRAY MMA 4:1HD, Skid Mounted Stencil Rig
        • KOLDSPRAY MMA 98:2 RETROFIT
        • KOLDSPRAY MMA 98:2, Skid Mounted Stencil Rig
        • KOLDSPRAY MMA 98:2WB, Walk Behind Line Striper
      • Easy Riser™ Striping Gun Elevator
    • Thermoplastic Equipment
      • PreMelters
        • TPM-1000
        • TPM-1500
        • TPM-1500 Trailer Mount
      • Walk-Behind Applicators
        • GRACO 300TC
        • GRACO ProMelt
        • GRACO Smart Dies
        • GRACO Thermolazer 200TC
    • Scarifers & Line Removers
      • Grindlazer DC1013 G & DC1013 G DCS
      • Grindlazer HP DC1013 G & HP DC1013 G DCS
      • Grindlazer HP DC1021 G & HP DC1021 G DCS
      • Grindlazer DC87 G
      • Grindlazer DC89 G
      • Grindlazer Pro RC813 G & RC813 G DCS
      • Grindlazer DCS Control
      • LazerVac Vacuums
      • Lazervac Cyclone 32
    • Pavement Maintenance
      • Cimline Crack Router
      • Cimline Crack Sealing Machine M4
      • Cimline Crack Sealing Machine M2
      • Cimline Crack Sealing Machine M1
  • About
  • Contact
  • (805) 388-5575

160SP Shot Type

  • Home
  • Pavement Marking
  • Epoxy Adhesive Applicators
  • 160SP Shot Type
BIGSHOT M125 Manual
BIGSHOT M125 Manual
December 19, 2019
160CF Continuous Flow
December 19, 2019

160SP Shot Type

The 160SP Epoxy Machine is a portable meter, mix and dispensing system for 1:1 ratio epoxy. It was designed to withstand the day to day rigors of the pavement maintenance and construction industries. Raised pavement markers, dowel bars and temporary construction zone delineators are only a few of the uses for this machine. The heart of the system is Dispensing Technology’s simple and durable positive displacement pumps. Mixing is accomplished with a low cost, maintenance free disposable static mixer. The two materials remain separate until they enter the disposable mixer. Thoroughly mixed and properly proportioned material is delivered at the push of a button. The 160SP is a single acting machine and the shot size can be varied by moving a simple limit switch. This allows the operator to optimize the amount of material used for each application. The efficient closed metering and mixing system minimizes the operator’s exposure to the material fumes and virtually eliminates the mess of hand measuring and mixing.

Categories: Epoxy Adhesive Applicators, Pavement Marking
Share
0
  • Description
  • Reviews (0)

Specifications

  • 3 tanks sizes available.
  • 1:1 ratio proportioning hard chromed pumps with variable output up to 10 cubic inches.
  • Disposable static mixer mixes both material completely.
  • Pallet mounted and self contained.
  • Skid dimensions are 66″ x 48″.  Fits in bed of standard full size pickup truck.
  • 6 hp Honda engine, 11.8 CFM @ 90 PSI compressor with continuous run unloader.
  • Mix manifold rated for 2000 PSI.
  • 2 components stay separated until they enter the
    Products

    disposable static mix tube.

  • All materials and components utilized in the delivery system are rated for full system pressure with appropriate safety factors.
  • Pneumatic filter and regulator combination is supplied to control the pressure to the pump motor system.
  • Maximum inlet pressure to the filter/regulator is 135 PSI.

Accessories/Options

  • 160SP-05 : Compressor Only Power Pack
  • 160SP-07 : Heat Tracing
  • 160SP-03 : Belt Heaters
  • 010-0168 : Hand Gun with Extension Hoses
  • 160SP-09 : Generator Compressor Power Pack
  • 160SP-04 : Solvent Flush System

Product Data Sheet

Reviews

There are no reviews yet.

Be the first to review “160SP Shot Type” Cancel reply

Your email address will not be published. Required fields are marked *

    Related products

  • 160CF Continuous Flow

  • Gravity Flow Bead Systems

  • GRACO LineLazer V 200HS


Our Policies
  • Selling Terms and Conditions
  • Privacy Policy
  • Terms & Conditions
Contact Us

Tel (805) 388-5575
Fax (805) 388-5560


390 Lombard Street,
Oxnard, CA 93030
D I S P E N S I N G T E C H . C O M

@2023 DTC - All Rights reserved - By The Rico Group